EV Charger Installation in Burnaby
Most Burnaby homeowners are looking at $900 to $1,600 for a fully installed Level 2 EV charger, permit included, inspection done, ready to charge. Where your final number lands depends on your panel size, how far the circuit needs to run, and whether you're in a detached home, townhouse, or strata unit. ElectroMax Systems is a BC-licensed, fully insured electrical company out of Surrey. We work in Burnaby constantly: from the newer builds in Edmonds and South Slope to older character homes in Burnaby Heights and the strata-heavy corridors around Metrotown and Brentwood.
Full-scope install,
no shortcuts.
Every Burnaby installation we complete covers the full scope of work - from the panel assessment to the final inspection sign-off. Here's what that looks like on every job.
- Dedicated 240V CircuitYour EV charger needs its own circuit; it can't share with anything else in the home. We size it at 40 or 50-amp based on your specific vehicle, your daily mileage, and what your panel can support without being pushed to its limit.
- Panel AssessmentWe check your panel capacity before a single wire gets pulled. Burnaby has a wide mix of housing stock; some homes run 200-amp service with room to spare, others are older and much tighter. You'll know exactly where you stand before we start.
- City of Burnaby PermitBC Safety Authority requires a permit for every Level 2 EV charger installation in BC. We pull it through the City of Burnaby's permit office and coordinate the inspection from start to close. The paperwork is our problem, not yours.
- Weatherproof SetupWhether you're in a detached garage, a carport, or an outdoor stall, we install accordingly. Proper conduit, weather-rated fittings, and secure mounting, built to handle Burnaby's wet winters without issue.
- Charger Compatibility CheckBefore anything goes on your wall, we confirm that the charger model, connector type, and amperage are matched to your vehicle. If you're considering a smart charger with Wi-Fi scheduling or load management, we'll walk you through what actually makes sense for your setup.
What’s different
in Burnaby.
Burnaby's housing stock is one of the most varied in the Lower Mainland, and that directly affects how your EV charger installation gets scoped and priced. Newer neighborhoods like South Slope, Edmonds, and parts of Burnaby Lake are mostly detached homes and townhouses built in the last 20 years. Those come with 200-amp panels and attached garages, generally straightforward installs with no surprises. Older areas like Burnaby Heights, Capitol Hill, and East Burnaby are a different story. A lot of that housing dates back to the 1960s and 70s, and many of those homes are still on 100-amp service. We check the panel load carefully before committing to anything. If an upgrade is needed, the paperwork is our problem, not yours. Strata properties around Metrotown, Brentwood, and Lougheed need council approval before work starts. If that's your situation, call us early; the approval process takes time, and we'll help you navigate it. All BC installations require a permit through BC Safety Authority. In Burnaby, that runs through the City of Burnaby Permits and Licensing office. We handle it completely.
Rebates you can
actually claim.
Depending on your utility provider and home setup, you may qualify for more than one rebate on your Burnaby EV charger installation. Here's what's currently on the table:
- CleanBC Go ElectricUp to $350 covers part of your Level 2 charger purchase and installation cost. You need to be a BC resident, use a BCUC-listed charger, and have the work done by a licensed electrician, which we are.
- BC Hydro EV Charging RebateUp to $500. Most Burnaby properties are on BC Hydro service, which means you likely qualify. Moreover, rebate amounts and eligibility conditions change periodically; confirm the current figures before you book.
Why Burnaby homeowners
call us instead.
ElectroMax Systems is BC licensed, fully insured, and WorkSafeBC covered. We pull every permit, coordinate every inspection, and complete the job properly the first time. We're based in Surrey, which puts us close to Burnaby, no inflated travel fees, no out-of-area contractor markups buried in your quote. We've installed enough EV chargers across the Lower Mainland to know that Burnaby jobs come with their own set of variables, strata approvals, older panel stock, dense urban lots with complicated wiring routes. We've dealt with all of it. You'll get a straight answer on scope and cost before we book anything.
Thinking about charging at home? Call ElectroMax Systems for a free estimate on your Burnaby EV charger installation. We'll assess your panel, walk you through rebate eligibility, and get you a clear number before any work is scheduled.
Burnaby EV charger
questions.
What is the difference between a hardwired EV charger and a plug-in unit?
A plug-in charger uses a NEMA 14-50 outlet - easy to remove if you move or want to swap units later. A hardwired charger connects directly to your panel with no outlet in between - cleaner install, no plug wear, and generally preferred by home inspectors. Charging speed is identical at the same amperage. We'll recommend the right setup based on your parking situation and whether you plan to take the charger with you when you sell.
Can my existing Burnaby home panel support a Level 2 EV charger?
It depends on your service size and current load. Most Burnaby homes built after 2000 have 200-amp panels with room for a dedicated EV circuit. Older homes in Burnaby Heights, Capitol Hill, and East Burnaby often have 100-amp service, which may need a load calculation or panel upgrade before the charger goes in. We assess this during your free estimate at no charge.
Do I need a licensed electrician for EV charger installation in Burnaby?
Yes. BC Safety Authority requires all Level 2 EV charger installations to be completed by a licensed electrician. The permit, inspection, grounding, and load verification all need to be done to code. An unlicensed install puts your permit, your insurance, and your home's safety at risk. Every technician is BC licensed and WorkSafeBC covered.
How long does an EV charger installation take in Burnaby?
On a 200-amp panel with a straightforward garage or carport setup, most installs take 3 to 5 hours. Add a panel upgrade, a long conduit run, or a strata approval process and the timeline extends. We give you a realistic scope before we show up, no surprises on install day.
Can I install an EV charger in a Burnaby strata or condo?
Yes, but it requires strata council approval before any work begins. BC strata rules have become more EV-friendly in recent years, and councils generally cannot unreasonably withhold consent. The process takes time, though, so get started early. We can advise on what to request from your council and what the installation scope looks like for a strata unit.